|
|
|
|---|
 Turbelle® nanostream® 6055 is an electronic speed controlled pump operating on safety extra-low voltage. It is ideal for use in every aquarium with a volume of 40 to 500 litres (10.5 to 132 USgal.) permitting washing of waves or simulating tidal currents. It contains a new microprocessor-controlled motor and thus can be called an “intelligent pump”:
The electronic motor adapts its speed automatically to the pump load and always seeks the best efficiency at the lowest possible consumption of energy. This energy consumption is about 30 per cent lower than in conventional pump motors.
The pump will be stopped immediately in case of blockage. After the blockage has been removed, the pump will start up automatically after a delay of 20 seconds.
The pump driver has been provided with a fish care function, which causes a revolution of the screw every twenty seconds when the pump is at a standstill.
All pumps with an electronic motor can be controlled by Multicontroller 7094 and 7095 as well as by Singlecontroller 7091.
As a standard feature, Turbelle® nanostream® is supplied with a magnetic holder, which enables uncomplicated attachment at any position on the aquarium pane.
- Propeller technology
- Titanium alloy shaft
- low motor heat
- 3D adjustment
- Magnet holder for glass panes up to 19mm (.74.)
- Safety extra-low voltage
- Controllable speed, wave simulation, tidal currents
Model 6055
- For aquariums from 40 to 500 litres (11 to 132 USgal.)
- Flow rate: 1,000 to 5,500 l/h (264 to 1,453 USgal./h)
- Energy consumption: 4 - 18 W
- Voltage / frequency: 230V/50-60Hz
- Cable length: 5 m (196.8 in.)
- Dimensions: diam. 70 mm (2.7 in.), output: diam. 40/15 mm (1.5 / .59 in.)
| | Item # | Description | Price | Add to Cart |
|---|
| TZ1215 | Tunze Turbelle NanoStream Pump 6055 | $227.28 |  |
|
|
|---|
 Model 6065
- For aquariums from 250 to 800 litres (66 to 211 USgal.)
- Flow rate: 6,500 l/h (1,717 USgal./h)
- Energy consumption: 12 W
- Voltage / frequency: 230 V / 50 Hz
- Cable length: 2 m (78.7 in.)
- Dimensions: diam. 90 mm (3.5 in.), Outlet: diam. 50 mm (1.96 in.)
- Magnet Holder up to a glass thickness of 19 mm (.74 in.)
Model 6085
- For aquariums from 400 to 1,000 litres (105 to 264 USgal.)
- Flow rate: 8,000 l/h (2,113 USgal./h)
- Energy consumption: 14 W
- Voltage / frequency: 230 V / 50 Hz
- Cable length: 2 m (78.7 in.)
- Dimensions: diam. 90 mm (3.5 in.), Outlet: diam. 50 mm (1.96 in.)
- Magnet Holder up to a glass thickness of 19 mm (.74 in.)
Model 6125
- For aquariums from 400 to 2,000 litres (105 to 528 USgal.)
- Flow rate: 12,000 l/h (3,170 USgal./h)
- Energy consumption: 24 W
- Voltage / frequency: 230 V / 50 Hz
- Cable length: 2 m (78.7 in.)
- Dimensions: diam. 90 mm (3.5 in.), Outlet: diam. 63 mm (2.48 in.)
- Magnet Holder up to a glass thickness of 25 mm (.74 in.)
| | Item # | Description | Price | Add to Cart |
|---|
| TZ1333 | Tunze Turbelle Stream 2 Pump 6065 | $152.39 | Add to Cart | | TZ1335 | Tunze Turbelle Stream 2 Pump 6085 | $201.59 | | | TZ1337 | Tunze Turbelle Stream 2 Pump 6125 | $267.89 | |
|
|
|---|
 Model 6105
- For aquariums from 200 to 2,000 litres (52 to 528 USgal.)
- Flow rate: 3,000 to 13,000 l/h (792 to 3,434 USgal./h)
- Energy consumption: max. 45 W.
- Voltage / frequency: 100 – 240 V / 50 – 60 Hz.
- Cable length: 5 m (196.8 in.)
- Dimensions: diam. 90 mm (3.5 in.), Outlet: diam. 50 mm (1.96 in.)
- Magnet Holder up to a glass thickness of 19 mm (.74 in.)
Model 6205
- For aquariums from 800 to 3,000 litres (211 to 792 USgal.)
- Flow rate: 5,000 to 22,000 l/h (1,320 to 5,811 USgal./h)
- Energy consumption: max. 55 W.
- Voltage / frequency: 100 – 240 V / 50 – 60 Hz.
- Cable length: 5 m (196.8 in.)
- Dimensions: diam. 90 mm (3.5 in.), Outlet: diam. 63 mm (1.96 in.)
- Magnet Holder up to a glass thickness of 25 mm (.98 in.)
Model 6305
- For aquariums > 3,000 litres (792 USgal.)
- Flow rate: 9,000 to 30,000 l/h (2,377 to 7,925 USgal./h)
- Energy consumption: max. 64 W.
- Voltage / frequency: 100 – 240 V / 50 – 60 Hz.
- Cable length: 5 m (196.8 in)
- Dimensions: diam. 90 mm (3.5 in.), Outlet: diam. 63 mm (2.48 in.)
- Magnet Holder up to a glass thickness of 25 mm (.98 in.)
| | Item # | Description | Price | Add to Cart |
|---|
| TZ1343 | Tunze Turbelle Stream Pump 6105 | $368.00 | | | TZ1345 | Tunze Turbelle Stream Pump 6205 | $585.83 | | | TZ1347 | Tunze Turbelle Stream Pump 6305 | $840.18 | |
|
|
|---|
- Magnetic rotors running on aqueous film bearings for low-maintenance and noiseless operation
- High efficiency: Negligibly low motor heat and low power consumption.
- Controllable speed, wave simulation, tidal currents.
- Safety extra-low voltage, blocking and run-dry protection, alert sound emitter.
- Speed controllable by driver or externally by Singlecontroller, Multicontroller. (sold separately)
- Bearing-free pump suction side
Output: 700–4000 l/h (184.9–1,056.6 US gal./h)
Pump wattage: 6–44 W
Pumping head H.max: 0.8–2.2m (31.4–110.2 in.) | | Item # | Description | Price | Add to Cart |
|---|
| TZ1364 | Tunze Turbelle Pump/Powerhead 7400/2 | $310.11 | |
|
|
|---|
 Turbelle® electronic 5001 is the result of twenty years of experience of TUNZE® Aquarientechnik GmbH in the field of submerged centrifugal pumps with electronic motor. Basically this model is identical with Turbelle® powerhead, however it has been fitted with electronic speed control and operated on safety extra-low voltage. Turbelle® electronic 5001 is ideal for the simulation of lapping waves or tidal currents in every aquarium. It contains a new microprocessor-controlled motor and thus can be called an “intelligent pump”:
The electronic motor adapts its speed automatically to the pump load and always seeks the best efficiency at the lowest possible consumption of energy. This energy consumption is about 30 per cent lower than in conventional pump motors.
The pump will be stopped immediately in case of blockage. After the blockage has been removed, the pump will start up automatically after a delay of 20 seconds.
The pump driver has been provided with a fish care function, which causes a revolution of the screw every twenty seconds when the pump is at a standstill.
Turbelle® electronic 5001 with an electronic motor can be controlled by Multicontroller 7094 and 7095 as well as by Singlecontroller 7091. It comes with a cable of 5 m (16 ft.) in length and an electronic power supply unit.
100 – 240 V / 50 – 60 Hz.
- Output: 700 - 4800 l/h
- (184.9 - 1,268 USgal./h)
- Pump wattage: 5 - 43 W
- Pumping head H.max: 0.8 - 2.5 m
- (31.4 - 98.4 in.)
| | Item # | Description | Price | Add to Cart |
|---|
| TZ1374 | Tunze Turbelle Electronic 5001 Pump/Powerhead | $246.00 | |
|
|
|
BlackWater Conditioner |
|---|
Overview:
• Establishes similar water conditions to those found in blackwater rivers, ... |
|
Read more »»»
|
|
Elos SV 0 |
|---|
Elos SV 0 has the smallest grain size. It is an innovative starter food for larvae and fry that will permit a ... |
|
Read more »»»
|
|
Reef Octopus Extreme 160 ... |
|---|
The Extreme skimmers are powered by the high performance Italian Sicce pu... |
|
Read more »»»
|
|
MA 957 CO2 Regulator |
|---|
CO2 adjustable flow pressure regulator with solenoid diaphragmvalve with 1.5 meter power cable and bubble c... |
|
Read more »»»
|
|
